What are electrical pipe accessories or conduit? What is the use of each?

Accessories electrical pipe or Conduit

1- COUPLING conduit .

2- Conduit Bushing head.

3- Laconate conduit (vertebrae).

4- Conduit of the knee.

5- Conduit bobbin bead(Union).

6- Connection interface conduit.

7- Conduit hub.

8- Conduit cover.

9- Conversion of conduit.

10- Bushing head.

11- Fastener One-sided and two-sided conduit.

12- conduit Clamp.

13- Candito cast iron Clamp.

14- Fastener conduit pipe .

15- Gland Flexible tube.

16- Flexible conduit connector.

17- condolet .

18- Support (holder) of the Unistrate rail.

19- Unistrate rail connections.

20- Unistrate rail equipment.

21- Screws and fittings required for installation.

COUPLING conduit:

conduit coupling is used to attach the head to the head of the conduits.

Conduit Bushing head:

Cast iron Conduit Bushing head is used to protect the outer shell of wires and cables during cabling operations at the inlet and outlet of hot galvanized conduits. It is also used in the installation of orthotics system equipment to conduits and to tighten and block the conduit duct with sealing material. Cast iron

A very important point in choosing and installing a bushing head is that the headband material is homogeneous with the conduit due to non-corrosion (rusting or oxidation). Therefore, for hot galvanized conduits, cast iron bushing head (Malibel Iron) is used due to its galvanizing capability and resistance to stress, wear and physical shocks. For aluminum candidiasis, headbushing with aluminum material and PVC or polyethylene or GRP conduit heads use Teflon or polyamide bushing heads or EBS material.

Laconate conduit (vertebrae):

Laconate is used to fix conduits to equipment such as junction box distribution panels or cable trays, etc.

An important point in choosing and installing lacunate is that the lacunate material is homogeneous with the conduit material. Therefore, for hot-dip galvanized conduit, malignant iron laconate lacunae and steel lacquers that have the ability to galvanize, and for aluminum conduits, aluminum or brass aluminum lacquers are used. For PVC and polyethylene conduits, Brass Bushing and nat are used.

Conduit of the knee:

Knee or knee flexion conduit is used to connect the two ends of the conduit at angles of 15 to 90 degrees that are not aligned. The radius of curvature of the knee depends on the diameter of the conduit and the cable passing through the conduit.

Conduit bobbin bead(Union):

The unit or bead of the conduit tube is used to connect the two ends of the conduit or the connections to each other with the ability to change direction and shift in one direction. The choice of ionic material also depends on the conduit material, and the similarity of the material is important.

Connection interface conduit:

Connection interface conduit is used to increase the length of the conduit and connect the two devices to each other.

Conduit hub:

The Conduit Hub is used to connect the Conduit to the box or to equip it, as well as to protect the output and fix the Conduit along with the laconate.

Conduit cover:

Conduit covers are produced in two types: internal and external threads. It is used to block the passage of Conduit or junction boxes.   In selecting and installing this connection, it is important to match its material with the material of the conduit or equipment.

Conversion of conduit:

Conversion of conduit Connect Use two allowed sizes of Conduit or Connectivity.

Bushing head:

Internal Bushing or Inside Bushing conduit is used to protect cables at the ends or at the beginning of equipment, junction boxes, and even conduit with laconate or other connection.

بست Fastener One-sided and two-sided conduit:

بست یا کلمپ کاندوئیت برای نصب و فیکس نمود Conducting clamps are used to install and fix conduit to structures or mechanical equipment or to concrete roofs and walls. Clamps are made of galvanized steel or cast iron with the ability to galvanize or stainless steel or aluminum and are determined depending on the type of material and the size of the conduit; their size and material.

بست conduit Clamp:

Cast iron conduit clamps used for profile structures or mechanical equipment that have the ability to galvanize and increase the installation speed of the conduit.

بست Candito cast iron Clamp:

Cast iron conduit clamps used for profile structures or mechanical equipment that have the ability to galvanize and increase the installation speed of the conduit.

بست Fastener conduit pipe:

conduit clamps for profile structures or mechanical equipment that have the ability to galvanize and increase the installation speed of the conduit.

بست condolet :

The condolet or box is the same shape or chamber that can be visited and the changes and repairs of the cables in the continuous routes of the conduit work with steel and cast iron. In direct types, 90 degrees, three-way and four-way, it is used to facilitate cabling operations and protection and maintenance and after-cab services in job conduit.

بست Support (holder) of the Unistrate rail:

Unistrate rail is suitable for quick support and installation of cable trays, cable ladders, installation of equipment such as plumbing, conduits, junction boxes, electrical panels, ducts, device lines and other electrical and mechanical equipment.

0